RENAULT LAGUNA PHASE 2 ' 01>.  

CLICK TO DOWNLOAD  THESE INSTRUCTIONS AS AN ADOBE ACROBAT FILE 


1. Manually lift up the ashtray assembly.

2. Remove the panel housing the Key Card apparatus, by pulling directly out.

3.: Climate Control Variants:. Grab underneath the heater assembly and pull out at the bottom. Position the unit towards driver.

Step 3b: NON Climate Control variants: Remove the cover surrounding the unit. Start with 2 small clips at the lower part, then 3 at the top. Remove the two screws in bottom of control unit. This unit has to be pushed in at the top and then twisted upwards to allow clearance of the tabs for the securing screws. 

4. Hook the bracket around the console wall at the heater control level.

5. Press the bracket tight to the wall and refit the heater unit.

6. Refit the trim and ashtray.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket