CHRYSLER VOYAGER ' 01> 71300

1. Unclip the trim immediately above the cup holders if fitted.

NB The cup holders were deleted from the console on 2002ym on diesel models and/or models with ACC.

2. Remove the screws behind this trim, if applicable

3. Unclip the fascia trim around the heater controls (secured with six clips), but leave the wiring connected.

4. Locate the bracket with the two screws to the left of the radio.

5. Refit the trim and screws.

NB on 2002ym 3.3 petrol vehicles, the radio and ACC unit are reversed and hence the bracket will locate at ACC level.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket