Step 1:     Use the bending tool to unclip the center console panel. Pull straight out.. Show extreme care when flipping out the panel. Clips are strong and we recommend to use a piece of cloth to protect the panel/console.

Step 2:     Next to the heater controls right side you find 2 Phillips screws that you remove .

Step 3:     Insert the Dash Mount behind the heater unit and use the 2 screws to install your Dash Mount. Tighten well.

Step 4:     Push panel back into position.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket