701112 FIAT STRADA PICK UP 2007>          LHD ONLY

1. Unclip the dash top panel.

2. Remove the two Torx 20 bolts in the recess.

3. Remove the two screws behind the ashtray flap securing the heater console panel.

4. Release the fascia panel and remove the three Torx 20 bolts behind.

5. Remove the radio.

6. Lever out the upper assemble of the centre console.

7. Locate the bracket on the left hand console wall at radio level, so that it hooks behind the rear edge and locks in to the dash contours.

8. Refit all parts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket