Seat Ibiza/Cupra 2002>

1. Remove the radio with the appropriate tools. Remove also the Sat Nav screen if fitted.

2. Unclip the storage tray.

3. Remove the four screws in the sides of the recess and the two in the upper trim.

4. Unclip the switch panel containing the heated seat switch etc.

5. Now unclip the entire console framework via the side wall clips/tabs. IT IS VERY TIGHT.

6. Locater the bracket with the guide tab level with the seek button to the left of the radio.

7. Refit all parts but ensure it is seated fully to allow re-fitting of the side screws.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket