711140 HYUNDAI i30

Step 1: Remove the two screws securing the dash top compartment.

Step 2: Unclip the tray assembly.

Step 3: Remove the central rear screw in the recess.

Step 4: Unclip the fascia starting with eth vents either side to enable the whole unit to be pulled directly out.

Step 5: Set the bracket against the console wall level with eth passenger airbag switch; it will follow the inner contours.

Step 6: For added stability use a self tapper in the plastic escutcheon via the rear arm of the bracket.

Step 7: Refit the trim in reverse.

back

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket