71173 Mercedes SL 2002>

1. Lower the passenger seat and slide back to the maximum.

2. Unclip the transmission tunnel panel starting at the rear.

3. Parallel with the gear selector, there are two Torx screws which should be removed.

4. Locate the bracket with these two screws but DO NOT tighten. Simultaneously slide the other arm into the gap between the gear shift surrounds and the leather console.

5. Align the bracket and tighten the screws.

6 Refit the side panel.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket