Step 1:     Remove the central air vent assembly by unclipping top and bottom with a flat bladed tool.

Step 2:    Remove the Torx screw in the bottom right hand wall of the ducting recess.

Step 3:    Insert the bracket's lower arm with the two holes, under the padded console (lever this up with a blade as you slide the arm in) so that the arm aligns with the screw hole. Locate the screw which is accessible via the front of the plate through the hole.

Step 4:    Carefully slide the vent housing from left to right between the two arms and push the combined pieces back into place via the clips.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket