|
Carphone Bracket |
Sole UK Distributors |
70373
Cadillac Deville 2000-
Right side of radio
5/64 drill bit and drill,10mm socket with driver, and Phillips screwdriver
Step 1: Begin by unclipping the trim next to the glove box. Refer to Photo one. This panel simply unclips. Do not remove entire panel. Remove the 10mm screw that is located behind. Open the glove box.
Step 2: Position the Dash Mount over this hole and replace the factory screw. Tighten well. For additional support, add the self tapping screw that is provided. Begin by drilling a small hole where the hole is on the mount. Do not exceed 1/2 inch. Add the self tapping screw with a Phillips screwdriver.
Step 3: Reassemble the trim bezel in reverse order.
Dashmount
will not be liable for any damage caused to a vehicle in executing the fitting
of the bracket