70374

Lincoln Continental 1998-

Right side of radio

9/32 socket with driver and flat bending tool

Step 1: Begin by unclipping the trim underneath the steering columnon the right side. Do not remove. Remove the 9/32 screw behind the panel. Be careful not to drop the screw behind the trim. Remove the trim bezel that surrounds the radio and climate control. This is clipped on. Use a flat bending tool at the bottom right corner and flip out. Work around the trim until it is unclipped. Set aside.

Step 2: Remove the two 9/32 screws to the right of the radio. Postion the Dash Mount over these holes and replace the factory screws. Tighten well.