70399 - Lincoln LS6/LS8 >02

Right side of climate control

9/32 and10mm socket and driver,phillips screwdriver and flat bending tool

Step 1: Begin by removing the trim bezel around the ashtray. This is clipped in. (Use Extreme Caution) Start at the top of the bezel and pull out. Remove this piece and set aside. Remove the two 9/32 bolts that hold the ashtray assembly. Pull out far enough to access the two 10mm bolts that hold the radio/climate control in place. Remove these two bolts. Remove the airvent assembly above the radio. This is clipped in. Insert a flat bending tool on the corner of the assembly and tilt out.

Step 2: Remove the two 10mm bolts that are holding the top of the radio and climate control. Pull radio out and set on a protective cloth. Remove the two Phillips screws that secure the climate control to the frame of the radio. Position the Dash Mount over these holes and replace the factory screws.