70588 SUZUKI X-90 4WD

RHD = LHD

Ikke 2-sidig tape.

2 x airbag

Tools required : Phillips screwdriver

GB/USA

Step 1: Pull out the 4 small plastic tabs on the heather control-arms. Unclip the panel surrounding the heather controls. It is clipped on and you can use a flat object to flip the panel out.

Step 2: In each upper corner you will find 2 Phillips-screws that you unscrew and then you can tilt the panel frame slightly out on the top.

Step 3: The Dash Mount arm is mounted behind the panel frame in the left corner. It will fit in right corner also. Tighten the screws well, and reinstall the panel.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket