Step 1: Flip out the panel surrounding the heater controls. It is clipped on and you can use a flat bending tool.

Step 2: Unscrew the 2 right screws and loosen the 2 left ones on the heater control assembly. Lift the assembly 10mm out on the right hand side.

Step 3: Place the Dash Mount arm with the 2 holes in behind the heater assembly. The small lip on the second arm is directed in behind the console-edge on the right side.

Step 4: Press heater unit back into position and reinstall screws. Clip front fascia back on.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket