70415 - Lincoln Navigator 01 - 02

Step 1: Begin by removing trim bezel that surrounds the radio and climate control cluster. Start with the upper right of the bezel and pull out. Continue this counterclockwise until all five clips are released. Set trim to the side.

Step 2: Remove the four 9/32 screws from the climate control. Pull the climate control out slightly and insert the Dash Mount into the climate control cavity. Note: ( On some models it may be necessary to pull the radio out slightly to get the climate control out. Position the holes on the Dash Mount over the existing lower screw holes. Replace the climate control.

Step 3: Replace the factory screws back into the climate control and reassemble the trim in reverse order.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket