Step 1: Remove the radio.

Step 2: Use a MTU bending tool or similar to bend out the centre console

panel. Start in the lower corners. Grab and pull straight out. It is clipped on.

Step 3: On the right side of heater controls you will find 2 Phillips-screws on

which you install the Dash Mount.

Step 4: Replace the panel and the Dash Mount is now coming out in the heater-

control opening next to the heater. Replace radio.

(The Dash Mount will also fit on the left side, but then it requires gently bending after

installation. This to make it align flush with the dashboard.)

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket