1. Remove the radio unit.

2. Remove the gear shift gaiter trim by pulling directly upwards: pull on the side at the front and then the rear with even pressure.

3. Remove the screws in each of the lower corners of the console fascia.

4. Unclip the radio trim surrounds.

5. Remove the three heater control knobs

6. Unclip the center control fascia from the base

7. Locate the bracket with the two screws to the left of the heater controls.

8. Refit the fascia trim, screws, gaiter trim and radio.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket