Step 1: Lift up the upper panel surrounding the clock. Start in front and pull slightly up and towards you. Remove the radio if so equipped.

Step 2: Unscrew the 2 torx-15 screws that appear and pull the panel slightly up and backwards. It unclips around the radio and heater.

Step 3: Install the Dash Mount on the centre console frame by hooking the arm behind the left edge. The rose pattern plate is pointing to the right side, which will locate partly over the left centre air vent.

Step 4: Put panels back into position in reverse order.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket