Step 1 : Open the centre console storage lid. Remove 2 bolts in front.

Step 2 : Apply parking brake and put the gear shifter in Drive. The engine MUST be switched off. Pull the panel around the shifter straight up and backward.

Step 3 : Unclip the panel surrounding the heater and radio by plying with a bending tool.

Step 4 : Loosen the 2 bolts on the left side of the radio and remove the one on the right side of the radio. Tilt the radio slightly out on the right side.

Step 5 : Position the Dash Mount behind the radio locating tab and reinstall the bolt.

Use an extra self-tapping screw in the right side of the console for maximum stability.

Step 6 : Reinstall all parts in reverse direction.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket