Step 1: Unclip the panel surrounding the shifter by pulling straight up in front first.

Remove the ashtray and open the centre console storage lid.

Step 2: Unscrew two screw in the storage bin and two under the ashtray. Then unscrew the

one located in front on each side of the console. Pull the console unit some 4-5 cm

backwards.

Step 3: Remove the 2 screws in each lower corner of the panel surrounding the heater

Pull panel out so that you can access the screw on the right side of radio.

NB : In some vehicles with modular radio the fixing may have to be supplied.

Step 4: Install the Dash Mount on this screw and tighten properly.

Step 5: Reinstall in reverse direction.

NB `01> facelift model with modular radio require the provision of the fixings, the locating hole remains the same

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket