70507 - Chevrolet Tahoe 99 - 06

Step 1. Start by removing entire dash panel. This is done by pulling the panel away from the dash and making sure to unclip it entirely. On the vehicles with automatic transmissions it is required that you secure the brake on the vehicle and put it in 1st gear in order remove the dash. Then you may place it back in park.

Step 2. Mounting the bracket. This is easily done by removing the screw on the bottom right hand side of the vent that is positioned on the upper right side of the dash as pictured below. This will require your 9/32 socket. Then place the mount so that the screw holes line up and the mount’s face is tilted toward the driver, then tighten back

Step 3. Replace the dash panel. Be sure to loop the mount through the panel and clip back in place. On automatic transmissions follow directions in step 1 to replace panel. Afterwards your mount should look like this.

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket