|
Carphone Bracket |
Sole UK Distributors
|
1. Remove the radio with the
appropriate radio tools (Audi keys)
NB Cars equipped with factory
fit Sat Nav will require bespoke radio tools.
2. Remove the two screws in the
upper corners of the radio recess.
3. Unclip the panel surrounding
the heater controls/climate control. Start at the base when to prevent damage
when flexing the veneer/carbon fibre.
4. In the upper left corner of
the heater recess there are two screws. One fixed in the left console wall and
the second pointing into the cabin from the rear framework.
5. Locate the bracket with
these two screws.
6. Refit the fascia, screws and
radio.
Dashmount
will not be liable for any damage caused to a vehicle in executing the fitting
of the bracket