Step 1: Loosen the screws located on the left side of lighter and far left on the dashboard. Press the panel under the steering column 1 cm down and unclip the main dash board panel.

Step 2: Remove the protection foil on the tape. Locate the Dash Mount on the right side of the radio. Location must be between the 2 square holes for the panel clips. For optimal stability we recommend the use of 2 self-drilling screws through the holes to the right of the tape.

Step 3: Reinstall the panel by sliding it in behind the Dash Mount to the right side or the radio.

96>

Step 1: Remove trim around radio and climate control. This unclips.

Step 2: Remove protective foil from dual sided tape and position the Dash mount on the flat area to the right .

Step 3: Reassemble trim bezel in reverse order.

 

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket