Step 1: Remove the trim bezel surrounding the radio by using a small flat screwdriver. It is clipped on.

Step 2: Remove the bolt on the right side of the radio by using the 9/32 socket and place the Dash Mount on the radio tap. The larger hole in the Dash Mount will then go over the top of centering pin on tab.

Step 3: Reinstall the bolt and then mark up for upper screw and drill with the 5/64-drill bit. Insert one 1/2inch screw to secure. Reinstall trim panel.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket