Step1: Remove the blind panel located under the radio. Take out the 2 screws that are behind this panel. Tilt out the storage bin.

Step 2: Pull out the console frame approx. 1 cm at the bottom and slide in the bracket at the right side of the radio. The hook at the rear of the bracket should hook on to the steel frame inside the dashboard.

Step 3: The long arm with the hole is to be fixed together with the right screw. Tighten the screws and reinstall the radio, bin and blind cover.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket