Jaguar XJ8 Series/XK8 / Daimler Sovereign V8

Step 1: Remove the black gear selector gaitor carefully, with a flat bladed tool

Step 2 : Remove the four fixings beneath and lever up the veneer panel

Step 3 : Lay the bracket against the left hand leather console wall, position according to taste, and to the type of installation, and secure the bracket with two self tapping screws in the plastic ledge

Step 4 : Refit the veneer panel and gaitor.

Jaguar S Type Automatic.

Step 1 : Unclip the complete transmission tunnel trim by gripping at the rear beneath the arm rest and pulling straight up and away from the fascia panel

Step 2 : The veneer panel around the gear shift is secured by four torx screws: remove the left hand pair and slide the bracket between the console edge and veneer.

Step 3: Refit the screws and trim

THIS BRACKET CAN BE FITTED ON THE LEFT OR RIGHT SIDE

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket