711031 BMW Z4 Upper Console

Step 1: Depress the two steel retaining clips in the upper section of the central vent assembly (they are c60mm inset from each end of the assembly). Lever out the assembly.

Step 2: Remove the two screws securing the radio framework.

Step 3: Remove the radio

Step 4: Remove the two screws in the lower radio recess.

Step 5: Lever out the fascia trim and insert the bracket under the panel, locating it with the lower left screw.

Step 6: Refit all parts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket