711049 NISSAN NOTE

1: Open the storage tray and unclip carefully, the two blanking plates inside.

2: Remove the Phillips screws beneath.

3:Unclip the blanking plate underneath the radio trim: there are two slots some 40mm in from each end.

4:Remove the Phillips screws beneath.

5:Lift out the entire centre console assembly.

6:Locate the bracket with the Phillips screw in the rear of the left hand air vent.

7:Refit the console so that the vent clip seats in the cut out of the bracket.

8. Refit all parts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket