70112 Hummer H2

Step 1: Unscrew the 2 hex bolts at the top of the center console. These are very long, a battery operated screwdriver would be advisable. Pull straight out at the top
Step 2: Unscrew the above-mentioned screws and unclip the panel.
Step 3: On the right side you will find a screw on to which you fix the bracket
Step 4: Refit parts and panels in reverse order.

(If the top section needs to be lifted out, remove the rubbermat in the tray. Unscrew 2 bolts and unclip the tray itself. Unscrew a bolt at the rear and lift up.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket