711176 DODGE NITRO

Step 1: Remove the rubber mat insert in the dash top tray.

Step 2: Remove the two screws beneath the mat.

Step 3: Unclip the tray and set aside.

Step 4: Unclip the silver fascia panel.

Step 5: Remove the four screws securing the audio unit: disconnect and remove.

Step 6: Locate the bracket with the rubber guide pin on the rear of the radio.

Step 7: Refit the unit with the bracket attached.

Step 8: Refit the remainder of the trim.

back

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket