71083 PEUGEOT 407 VENT

1. Remove the two small gauge hex screws in the radio fascia. Using a small Phillips screwdriver unlock the radio and remove.

2. Remove the two screws securing the panel with the storage tray, above the radio and remove this also.

3. Remove the two Phillips screws securing the upper fascia/vent assembly: Lever this panel out slightly so that it frees from the locating tabs in the corners.

4. Locate the bracket with the right hand locating tab and the right hand screw adjacent to the steering wheel.

5. Refit the parts in reverse.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket