711075 FORD FUSION / FIESTA VENT 2005 - 2007

1. Remove the Ford radio with the Ford removal keys: disconnect the aerial and harness and set aside.

2. Remove the Torx 20 screw in the centre of the rear of the housing beneath the radio.

3. Remove the two Phillips screw in either side of the radio recess.

4. Unclip the vented blanking plate and the the two switches on the top of the fascia panel.

5. Remove the Phillips screws behind each.

6. Unclip the upper fascia panel.

7. Locate the bracket with e Phillips screw behind the heated rear window switch. You can fit the bracket on the left hand screw behind the blanking plate if desired.

8. Refit all parts.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket