71041 PORSCHE 911 2005> 997/BOXSTER 2005>

1. Remove the panel in the rear of the passenger kick well incorporating the 12 v power supply.

2. Remove the two tabs securing the knee roll panel and unclip this section.

3. Unclip the console edge panel that runs front the dash top to the transmission tunnel. It is secured with 3 speed clips.

4. Locate the bracket with Torx 20 screw adjacent to the lower switch bank.

5. Refit the panels.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket