711069 LAND ROVER FREELANDER 2 2007

Step 1: Remove the rubber mat from the fascia pen tray.

Step 2: Remove the Torx screws beneath.

Step 3: Remove the dash top speaker grille trim by unclipping at the windshield end and sliding back away from the console fascia.

Step 4: Remove the two Torx screws in the upper part of the trim, that are revealed.

Step 5: Unclip the fascia by sliding a trim tool in behind each lower corner of the fascia panel and then lift upwards towards the screen

Step 6: Remove the two left hand Torx screws securing the audio unit.

Step 7: Locate the bracket with the guide pin in the recess.

Step 8: Refit the Torx and slide the panel back in to place around the plate so that it emerges from the audio aperture.

Step 9: Refit the screws and trim.

Dashmount will not be liable for any damage caused to a vehicle in executing the fitting of the bracket